Soy Candle Frosting, Wet Spots and Rough Tops: What They Mean

By Julia
Soy wax candles with wood wicks in clear and black glass jars, beside small tins with cotton wicks

Key Takeaways

  • Frosting is soy wax changing its crystal form, not its ingredients. The fats in soy wax can set in more than one crystal structure. Over time and through warm-cool cycles they shift to a more stable one, and that can show as a white bloom (US Patent 8,603,197).
  • A wet spot is a gap, not a liquid. It's a patch where the wax has pulled away from the glass as it cooled. Wax makers formulate for adhesion precisely so it "does not pull away from the container when cooled" (US Patent 6,797,020).
  • Rough tops, small cracks and air pockets come from the same source. Soy wax shrinks and crystallises as it sets, and the patent literature lists "cracking, air pocket formation, product shrinkage" among the known traits of vegetable wax candles (US Patent 7,462,205).
  • These are changes in how the wax looks. What's worth a closer look is different: a crack in the glass, a tall or smoking flame, or a candle that's tunnelling.

You've lit a new soy candle, or you're about to, and the top has a white, frosty bloom. Or there's a patch down the side that looks wet. Or the surface isn't smooth.

Here's the short answer. All of these are things soy wax does as it sets, and none of them means the wrong ingredients went in. We'll go through what causes each one, what you can do about it, and the handful of things that genuinely are worth a closer look.

We should say up front that we make and sell hand-poured soy candles. So we see all of these on our own pour table.

Three soy wax candles with untrimmed wood wicks, two in clear glass jars and one in a black glass jar

Why soy wax doesn't set perfectly smooth

Soy wax is soybean oil that's been hydrogenated to make it solid (Rezaei, Wang & Johnson, JAOCS 79, 2002). Chemically, it's a fat. That matters, because fats crystallise in a particular way.

A US patent for soy-based candle wax explains it plainly: "Triglycerides exhibit well-documented polymorphic behavior." Polymorphism, in the patent's words, "means that there are multiple crystal forms of the material that can exist" (US Patent 8,603,197).

So the same wax can set in different crystal arrangements. Which one you get depends on how fast it cooled, and on what temperatures it has been through since.

Research on soy candle wax has described the material's limits frankly. A 2007 study in the Journal of the American Oil Chemists' Society called partially hydrogenated vegetable oil "limited primarily to container candles", citing "brittleness when a hard material is produced, and greasiness when it is soft" (Wang & Wang, JAOCS 84, 2007). It's one reason soy candles are mostly poured into jars.

Frosting: the white bloom

Frosting is a white, chalky or crystalline film on the top or sides of the wax.

The patent describes the mechanism. "Under rapid cooling, less stable lower melting less dense crystals form initially, but given time and heat cycles the mobility of the molecules allow their rearrangement to higher melting, more stable and more dense crystal forms." It goes on: "This rearrangement can lead to the problems of cracking and blooming in candle produced from vegetable wax" (US Patent 8,603,197).

In plain terms, the wax slowly reorganises itself into a tighter crystal structure. The white you see is those crystals.

White soy wax flakes in a glass bowl, the raw wax before it is melted and poured

Two things follow from that.

  • Frosting isn't a different ingredient. It's the same wax in a different crystal form. Nothing has been added and nothing has separated out.
  • It can appear later. The patent's own words are "given time and heat cycles". A candle that left us smooth can arrive frosted, or frost after a run of warm days and cool nights.

Wet spots: where the wax let go of the glass

A wet spot looks like a damp patch on the side of a glass jar. It isn't wet. It's a place where the wax has come away from the glass, leaving a thin air gap that catches the light differently.

Wax shrinks as it cools, and soy wax is known for it. One candle-wax patent lists "cracking, air pocket formation, product shrinkage" among the problems reported for vegetable oil candles (US Patent 7,462,205). Another describes a container wax formulated with "the proper surface adhesion characteristics so the wax does not pull away from the container when cooled" (US Patent 6,797,020). That a wax has to be designed to stop it tells you how naturally it happens.

Freshly poured liquid soy wax setting in clear glass jars with wood wicks, and in small tins with cotton wicks

Because a wet spot comes from shrinkage, it can appear after the candle has been somewhere cold, such as a delivery van in winter. It changes how the jar looks from the outside, not what's in it.

Rough tops, sink holes and small cracks

These share a cause with wet spots: wax contracting as it sets.

  • Rough or bumpy tops. The surface sets first, while the wax beneath is still cooling and shrinking. The top can pucker, ripple or set unevenly.
  • Sink holes. As the inside cools and shrinks, it can pull the surface down, often near the wick. Sometimes the dip is visible. Sometimes it's an air pocket under a surface that looks flat.
  • Fine cracks. Hard soy wax can be brittle, the trait the 2007 study describes. A fast temperature drop can open a hairline crack across the top.

What changes after the first burn

When you burn a candle, the top layer melts. When you blow it out, that layer sets again. So the surface you see after the first burn is a new one, formed on a second cooling.

That's why a rough or cracked top usually isn't the surface you live with. The first burn matters for a different reason too. It sets the shape of the melt pool for the rest of the candle's life. That's the subject of our guide to why candles tunnel and how to stop it.

Close-up of the smooth soy wax top of a NOIR candle in a black glass jar, with a trimmed wood wick

Frosting is different. Because it comes from the wax's crystal structure, it can return after the wax has melted and set again.

What you can do about it

You can't stop soy wax behaving like soy wax. You can avoid making it worse.

  • Keep candles away from temperature swings. Heat cycles drive the crystal changes behind frosting, so a sunny windowsill or the top of a heater is the worst place to store one. A cupboard is better.
  • Let a cold candle warm up before you light it. If it has come in from a cold car or a cold room, give it time to reach room temperature.
  • Burn it properly the first time. Let the melt pool reach the edge of the jar. That resets the top and sets up an even burn. Our guide to burning a candle properly covers the rest.
  • Trim the wick. A short wick gives a steadier flame. Our wood wick and cotton wick guide covers how each one is trimmed.

What is worth a closer look

The things above are about how the wax looks. A few things aren't, and those are the ones to act on.

  • A crack in the glass. That's different from a crack in the wax. Don't burn a candle in a cracked jar.
  • A flame that's tall, flickering hard or smoking. That's usually a wick that needs trimming, or a draught. Put it out, let it cool, trim the wick and move it out of the draught.
  • A candle that's tunnelling, burning down the middle and leaving a wall of wax. That's a burn problem, not a wax quirk, and it can usually be fixed.

Our candles

Our candles are hand-poured in Melbourne with 100% natural soy wax. Our Signature range uses wood wicks made in the USA, and our Weekday range uses lead-free cotton wicks. Fragrance oils are phthalate-free and made in Australia.

Because each one is poured by hand and sets in its own conditions, no two tops are identical. Frosting and the odd wet spot are part of working with soy, and we'd rather explain them than pretend they don't happen.

Frequently asked questions

Is frosting on a soy candle a defect?

No. Frosting is soy wax shifting to a more stable crystal form. It's the same wax, arranged differently. It's a well-documented property of the fats soy wax is made from.

Why does my candle look wet on the side?

That's a wet spot. The wax has pulled away from the glass as it cooled, leaving a thin air gap. It isn't liquid, and the wax itself hasn't changed.

Can I get rid of frosting?

Not permanently. Burning melts the top layer, and it sets again when you put the candle out. Frosting can return over time, especially if the candle goes through warm and cool spells. Storing it somewhere with a steady temperature helps.

Why is there a hole or dip near the wick?

That's a sink hole. The wax shrinks as it cools, and the centre, which cools last, can pull the surface down. The first full burn melts the top and usually levels it.

The short version

Frosting is soy wax changing crystal form. Wet spots are where it has pulled away from the glass. Rough tops, sink holes and fine cracks are the wax shrinking as it sets. All of them are about how the candle looks.

The things worth acting on are the glass, the flame and the burn. For the burn, start with why candles tunnel. If you're wondering what the wax itself is, our piece on what "soy blend" means on a label explains why some makers mix soy with other waxes.

Sources

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.